Għal inġiniera, speċjalisti tal-akkwist, u maniġers tal-proġetti, li jafu l-piż għal kull metru ta 'ASTM A312 TP316L Skeda 40 pajp huwa kritiku għalkalkoli strutturali, tbaħħir, u ippjanar ta 'installazzjoni. It-tabella li ġejja tipprovdi areferenza professjonaligħal daqsijiet tal-pajpijiet nominali standard.
ASTM A312 TP316L SCH 40 Ċart tal-Piż tal-Pipe
| Daqs nominali tal-pajp (pulzier) | Dijametru ta' Barra (mm) | Ħxuna tal-ħajt (mm) | Piż għal kull metru (kg/m) |
|---|---|---|---|
| 1/8" | 10.3 | 2.77 | 0.37 |
| 1/4" | 13.7 | 2.87 | 0.50 |
| 3/8" | 17.1 | 2.87 | 0.65 |
| 1/2" | 21.3 | 2.77 | 0.88 |
| 3/4" | 26.7 | 2.87 | 1.17 |
| 1" | 33.4 | 3.38 | 1.64 |
| 1 1/4" | 42.2 | 3.56 | 2.19 |
| 1 1/2" | 48.3 | 3.68 | 2.58 |
| 2" | 60.3 | 3.91 | 3.42 |
| 2 1/2" | 73.0 | 4.78 | 4.55 |
| 3" | 88.9 | 5.49 | 6.05 |
| 3 1/2" | 101.6 | 5.74 | 6.97 |
| 4" | 114.3 | 6.02 | 8.17 |
| 5" | 141.3 | 6.55 | 11.0 |
| 6" | 168.3 | 7.11 | 14.3 |
| 8" | 219.1 | 8.18 | 22.0 |
| 10" | 273.0 | 9.27 | 31.9 |
| 12" | 323.9 | 10.97 | 44.5 |
| 14" | 355.6 | 12.70 | 55.0 |
| 16" | 406.4 | 14.27 | 70.3 |
| 18" | 457.0 | 15.09 | 85.8 |
| 20" | 508.0 | 15.88 | 102.0 |
| 24" | 609.6 | 18.26 | 136.0 |
Noti:
Il-piż għal kull metru huwaapprossimattivu bbażati fuqSkeda 40 ħxuna tal-ħajt.
Il-kalkoli huma bbażati fuqASTM A312 TP316L densità tal-istainless steel ≈ 8.0 g/cm³.
Għal skedi tal-pajpijiet tad-dwana jew ħitan eħxen (SCH 80, SCH 160), il-piż għandu jiġi kkalkulat mill-ġdid.
